Requires

• GIEPY

• PIXI

• ROM file that has not installed any SpriteTools

Procedure

1. Copy routines directory from PIXI to GIEPY.
   

2. Set the options as follows.

   Option	value
   PIXI compatible	true(Enable)
   Libraries directory	routines

   If you previously installed the PIXI compatibility option disabled,
   add the following as well.

   Option	value
   Force-reinstall	true(Enable)

3. Edit the sprites list file.

4. Correct the sprite’s config file for GIEPY.

5. Execute GIEPY.

I recommend that you disable the Force re-install option after completing the procedure.

Notes

Some sprites probably need modifications.

See here.

Troubleshooting

macro not found

E:\giepy_v1.00\sprites\normal\pixi\FireBro.asm:27: error: Unknown macro [%SubOffScreen()]
E:\giepy_v1.00\sprites\normal\pixi\FireBro.asm:38: error: Unknown macro [%SubOffScreen()]
E:\giepy_v1.00\sprites\normal\pixi\FireBro.asm:183: error: Unknown macro [%GetDrawInfo()]
E:\giepy_v1.00\sprites\normal\pixi\FireBro.asm:271: error: Define !ExtendedOffset not found
Assembling of "E:\giepy_v1.00\sprites\normal\pixi\FireBro.asm" failed...
CFG file "E:\giepy_v1.00\sprites\normal/pixi/FireBro.json" processing failed...

There are multiple causes to consider.

1. PIXI Compatible mode is disabled
   Did you operate according to the procedure?

2. PIXI’s “routines” directory us not copied.
   Did you operate according to the procedure?

3. Wrong library directory specification
   Correct library directory specification.

4. Incorrect library file name
   Correct sprite ‘s asm file (or library file name).

---